Laboratoire de Mécanique, Structure & Énergétique (LMSE)

Equipe CARACTÉRISATION STATIQUE ET DYNAMIQUE DES MATÉRIAUX (CSDM) 

1. Mansouri Lila, Djebar Arezki, Khatir Samir, Behtani Amar, Tiachacht Samir, Slimani Mohamed, Abdelwahab Magd. A comparative study of the behavior of glass fiber -reinforced polyster composite laminate sunder static loading. Springer nature singapore pte ltd. 2019.
2. Touahir Kamal, Bilek Ali, Bocher Phillipe, Beldi Mustapha, Experimental and numerical analysisof the feild of the frozen stresses in an epoxy sphere using the stress freezing method and mechanical slicing. Journal of materials and engineering structures. 2018.
3. Zouaoui Salah, Djebouri Hassane, Bilek Ali, Mohammedi Kamal. Modelling and simulation of solid particle sedimentation in an incompressible newtonian fluid. Mathematics in computer science. 2017.
4. Mameri Ali, Azem Said, Bilek Ali. Synthesis of metallic and intermetallic matrix composites reinforced by alumina by reaction in Nio/AI mixtures. The indian institute of metals IIM2017,
5. Lila Mansouri, Arezki Djebbar et col. ^«Effet of hygrothermalaging in distilled and saline water on the mechanical behaviour of mixed short fiber/woven composite» Composite Structures 207 (2019) pp. 816-825. https:/doi.org/1016/j.compstruct.2018.09.067COST10213
6. Fatiha Teklal, Arezki Djebbar et col.^«A review of analytical models to describe pull-out behavior-fiber/matrix adhesion ^». Composite Structures 201 (2018) pp. 791-815.
7. https:/doi.org10.1016/j.compstruct.2018.06.091.

8. Teklal Fatiha, Kacimi Bachir, Djebbar Arezki. ^«Etude expérimentale du comportement d’un composite UD à fibres de carbone ^» 5^éme conférence internationale des énergies renouvelables (CIER-2017).
9. Proceding of Engineering and Technology –PET vol 31 pp.60-65.ISSN 2356-5608.

10. Kacimi Bachir, Teklal Fatiha, Djebbar Arezki.^«Caracterisation du comportement mécanique d’un composite à usage orthopédique » 5^éme conférence internationale des énergies renouvelables (CIER-2017)
11. Proceding of Engineering and Technology –PET vol 31 pp.48-53.ISSN 2356-5608.
12. Djebali Said, Larbi Said. Bilek Ali. Study of the Tribological Behavior of a Pin on Disc Type of Contact. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering,Vol: 10, No: 2016. waset.org/Publication/10004854.
13. Larbi Said, Bensaada Rachid, Djebali Said, Bilek Ali. Experimental and Theoretical Study on Hygrothermal Aging Effect on Mechanical Behavior of Fiber Reinforced Plastic Laminates. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, Vol: 10, No: 2016. waset.org/Publication/10004856.

Équipe 02: Valorisation Des Ressources Énergétiques

1- Lisa Boussaba, GillesLefebvre, Saïd Makhlouf, Arnaud Grados, LaurentRoyon. Investigation and properties of a novel composite bio-PCM to reduce summer energy consumptions in buildings of hot and dry climates. Solar Energy. Volume 214, 15 January 2021, Pages 119-130.

https://www.sciencedirect.com/science/article/abs/pii/S0038092X20312202

2- Lisa Boussaba, Said Makhlouf, Amina Foufa, Gilles Lefebvre, and Laurent Royon, Vegetable fat : A low-cost bio-based phase change material for thermal energy storage in buildings, Journal of Building Engineering 21 (2019) 222-229. https://doi.org/10.1016/j.jobe.2018.10.022

https://www.sciencedirect.com/science/article/pii/S2352710218305096

3- Ilyes Mitiche, Omar Lamrous, Said Makhlouf, Francesca Marchetti, and Nadhira Laidani. Effect of the interface layer vibration modes in enhancing thermal conductivity of nanofluids. Phys. Rev. E 100, 042120 – Published 16 October 2019

4- Lisa Boussaba, Amina Foufa, Said Makhlouf, Gilles Lefebvre, Laurent Royon, Elaboration and properties of a composite bio-based PCM for an application in building envelopes, Construction and Building Materials 185 (2018) 156-165. https://www.sciencedirect.com/science/article/pii/S0950061818317690

 5- L. Boussaba, S. Makhlouf, AA. Foufa, Experimentation of a Novel Composite Phase Change Material for Thermal Comfort Improvement and Energy Saving in Buildings. Journal of Building Materials and Structures, (2018) 5: 43-54. http://journals.oasis-pubs.com/index.php/jbms/article/view/50/54

6- H. Hamouche, S. Makhlouf, A. Chaouchi, M. Laghrouche. Humidity Sensor Based on Keratin bio Polymer Film. Sensors and Actuators A: Physical Volume 282, 15 October 2018, Pages 132-14. https://www.sciencedirect.com/science/article/abs/pii/S0924424718306101

7- Lisa Boussaba, Amina Foufa, Said Makhlouf, Gilles Lefebvre, Laurent Royon Elaboration and properties of a composite bio-based PCM for an application in building envelopes. Construction and Building Materials Volume 185, 10 October 2018, Pages 156-165. https://www.sciencedirect.com/science/article/abs/pii/S0950061818317690?via%3Dihub

8- Lisa Boussaba, Said Makhlouf, Amina Foufa, Gilles Lefebvre, Elaboration and Characterization of a Novel Buildings Material Impregnated with an Organic PCM for Thermal Inertia Improvement and Energy Saving, Proceeding of Engineering and Technology –PET Vol.29 pp.18-23. http://ipco-co.com/PET_Journal/CIER-2017-papers/ID-211.pdf

9- Oussama CHABANI, Stéphane ABIDE, Nacer LAMROUS, Belkacem ZEGHMATI. NUMERICAL STUDY OF NON-BOUSSINESQ CONVECTION IN A VENTILATED CAVITY» Computational Thermal Sciences, 9(2): 135–149 (2017).

10- Nadhira Laidani, Francesca M Marchetti, Hafeez Ullah, Marina Scarpa, Cecilia Ada Maestri, Said Makhlouf, Gloria Gottardi, Ruben Bartali . Graphene Powder Processing For Water Solar Distillation using Nanofluids. Materials Science. 2016.https://cris.fbk.eu/handle/11582/319169#.YBG0ZPlKjIU

11- Said MAKHLOUF, Mourad Laghrouche, Abd El Hamid Adane

Hot Wire Sensor-Based Data Acquisition System for Controlling the Laminar Boundary Layer Near Plant Leaves Within a Greenhouse. Engineering IEEE Sensors Journal 2016 (First Published: 1 April 2016). https://ieeexplore.ieee.org/document/7386578

DOI:10.1109/JSEN.2016.2518740, Corpus ID: 32596908

12- Souad Khedache, Said Makhlouf, Dihia Djefel, GillesLefebvre, Laurent Royon. Preparation and thermal characterization of composite “Paraffin/Red Brick” as a novel form-stable of phase change material for thermal energy storage. International Journal of Hydrogen Energy Volume 40, Issue 39, 19 October 2015, Pages 13771-13776. https://doi.org/10.1016/j.ijhydene.2015.03.075

https://www.sciencedirect.com/science/article/abs/pii/S0360319915006746

13- Dihia Djefel, Said Makhlouf, Souad Khedache, Gilles Lefebvre, LaurentRoyon. Preparation and characterization of stearic acid/olive pomace powder composite as form-stable phase change material. International  Journal of  Hydrogen  Energy, Volume 40, Issue 39, 19 October 2015, Pages 13764-13770. https://doi.org/10.1016/j.ijhydene.2015.05.078

https://www.sciencedirect.com/science/article/abs/pii/S0360319915012641.

14- N. Lamrous, S. Makhlouf, N. Belkaid. Numerical study of water and heat transfer in unsaturated clay-loam soil. Int. J. Simul. Multisci. Des. Optim. 2014, 5, A19 Published by EDP Sciences, 2014. DOI: 10.1051/smdo/2013020. https://www.ijsmdo.org/articles/smdo/full_html/2014/01/smdo130020/smdo130020.html

15- S. Makhlouf, S. Khedache, D. Djefel, G. Lefebvre. Thermomechanical Characterization of a Mortar Reinforced by Animal Fibers. Key Engineering Materials, 550 pp 92-98.                                                 DOI: 10.4028/www.scientific.net/KEM.550.91.2013.

16- S. Makhlouf, M. Laghrouche. Development of Automatic Wireless System Applied for soil Temperature Mesurement. Sensors & Transducers Journal. Vol 142, Issue 7, Jully 2012, pp 69-75. Sensors & Transducers ISSN 1726-5479. 2012 by IFSA.  http:/www.sensorsportal.com. 2012.

17- Samir KACED, Gilles LEFEBVRE, Said MAKHLOUF. 2007. Signal de température périodique annuel en surface de la région de Trappes. Récents Progrès en Génie des Procédés – Numéro 96 – 2007 ISBN 2-910239-70-5, Ed. SFGP (Société Française du Génie des Procédés), 9, 10 et 11 Octobre 2007 Saint Etienne, France. URL: http://www.emse.fr/sfgp2007/dyn_programme_resumes.php

18- R. Nebbali, S. MAKHLOUF, T. Boulard, J.C Roy. 2006. A Dynamic Model for the Determination of Thermal Boundary Conditions in the Ground of a Greenhouse. ISHS Acta Horticulturae n° 719, Volume 1, pp. 295-302, 30 Sept 2006. URL: http://www.actahort.org/books/719/

19- R. Nebbali, J.C Roy, T. Boulard and S. MAKHLOUF. 2006.  Comparison of the Accuracy of Different CFD Turbulence Models for the Prediction of the Climatic Parameters in a Tunnel Greenhouse; ISHS Acta Horticulturae n° 719  Volume 1,  pp.287-294, 30 Sept 2006. URL: http://www.actahort.org/books/719/

20- A. Jaffrin; N. Bentounes; A.M.Joan; S. MAKHLOUF. 2003. Landfill Biogas for Heating Greenhouses and providing Carbon Dioxide Supplement for Plant Growth. Biosystems Engineering (2003) 86(1), pp 113-12. URL: http://www.linkinghub.elsevier.com/retrieve/pii/S1537511003001107

Équipe 03: Physique des matériaux 

 1 – N. Zazi, H. Aouchiche, C. Benbaha, and Jean Paul Chopart, Sulfuric containing sugar bath and permanent weak magnetic field effect during anodizing AlCu6Si alloy sheet surfaces, accepted in  Russian Journal of Non-Ferrous Metals.  

https://doi.org/10.3103/S1067821218020128

2 – Doubly Differential and Integral Cross Sections for Electron Elastic Scattering by Hydrogen Chloride and Hydrogen Fluoride, F. Medegga and H. Aouchiche, High Energy chemistry.  https://doi.org/10.1134/S001814391708001X

3 – Effects of lithium insertion and deinsertion into V2O5 thin films: Optical, structural, and absorption properties, R. Jourdani, L. Jadoual1, M. Ait El Fqih, A. El Boujlaidi, H. Aouchiche and A. Kaddouri, Surf. and Interface. Anal. 50, 52 (2018)

https://doi.org/10.1002/sia.6331

4 – Orientation effect on the secondary-electron distributions for the HCl double ionization S Mokrani, H Aouchiche and C Champion, Indian J Phys, .        https://doi.org/10.1016/j.elspec.2016.04.003

5 – Double ionization of the hydrogen sulfide molecule: Influence of the target orientation on multiple differential cross sections, N. Imadouchene, H. Aouchiche and C. Champion, J Elec. Spectr. Rel. Phenom. 36, 10 (2016).

http://dx.doi.org/10.1016/j.elspec.2016.04.003

6 – Differential and integral cross sections for electron elastic scattering by ammonia for incident energies ranging from 10 eV to 20 KeV, N. Sali and H. Aouchiche, Revista Mexicana de Fısica 64, 498 (2018).

https://doi.org/10.31349/RevMexFis.64.498

7 – Differential and Integral Cross Sections of Electron Elastic Scattering by PH₃ Molecule in the Energy Ranging from 10 eV up to 20 keV, H. Aouchiche  and F. Medegga.

https://doi.org/10.1134/S0036024419010035

8 – Angular Distribution of Sputtered Particles from Ternary Alloy Fe_71:9Cr_5:6Al_22:5 under Kr⁺ Bombardment at Normal Incidence, A. Afkir, M. Ait El Fqih, A. El Boujlaidi, L. Jadouala, R. Jourdani, H. Aouchichec and A. Kaddouri. Acta physica polonica 135, 434 (2019).

https://doi.org /10.12693/APhysPolA.135.434

Équipe 04: Dynamique des Structures

1. Tiachacht, S., Bouazzouni, A., Khatir, S., Wahab, M. A., Behtani, A., & Capozucca, R. (2018). Damage assessment in structures using combination of a modified Cornwell indicator and genetic algorithm. Engineering Structures, 177, pp. 421-430. https://doi.org/10.1016/j.engstruct.2018.09.070.15 December 2018.
2. BELGAID, Hocine et BOUAZZOUNI, Amar. Vibration analysis of mechanical structures with a new formulation of the isogeometric collocation method. European Journal of Mechanics-A/Solids, 2018, vol. 68, pp. 88-103. https://doi.org/10.1016/j.euromechsol.2017.10.007.
3. Tiachacht S., Bouazzouni A., Khatir S., Behtani A., Zhou Y.-L.-M., Wahab M. Abdel Structural health monitoring of 3D frame structures using finite element modal analysis and genetic algorithm. Journal of Vibroengineering, Vol. 20, Issue 1, 2018, p. 202‑214. https://doi.org/10.21595/jve.2017.18571.15 February 2018
4. Behtani A., Bouazzouni A., Khatir S., Tiachacht S., Zhou Y.-L., Abdel Wahab M. Damage localization and quantification of composite beam structures using residual force and optimization. Journal of Vibroengineering, Vol. 19, Issue 7, 2017, p. 4977‑4988. https://doi.org/10.21595/jve.2017.18302. 15 November 2017
5. S Tiachacht, A Bouazzouni, S Khatir, M A Behtani, Y-L Zhou and M Abdel Wahab, 2017, A proposal application based on strain energy for damage detection and quantification of beam composite structure using vibration data, Journal of Physics. 1742-6596 842 012027 doi:10.1088/1742-6596/842/1/012027. 2 June 2017
6. A Behtani, A Bouazzouni, S Khatir, S Tiachacht, Y-L Zhou and M Abdel Wahab, 2017, Damage localization and quantification of composite stratified beam Structures using residual force method, Journal of Physics: 1742-6596 842 012028 doi:10.1088/1742-6596/842/1/012028. 2 June 2017
7. S Khatir, A Behtani, S Tiachacht, A Bouazzouni, M Abdel Wahab and Y-L Zhou, 2017, Delamination detection in laminated composite using Virtual crack closure technique (VCCT) and modal flexibility based on dynamic analysis, Journal of Physics: 1742-6596 842 012084 doi:10.1088/1742-6596/842/1/012084. 2 June 2017

Équipe 05: Dynamique des Fluides et Traitement Thermomécanique des Matériaux

1-   Youcef Hadj Ali, Nacer Zazi, Hülya Durmus, Jean-Paul Chopart,  Effects of ECAP with one pass severe deformation on microhardness, texture, and corrosion behavior of AA1370 aluminum alloy wire, Physics of Metals and Metallography, accepted  July, 21, 2020.

2- Samia Taleb, Nahed Dokhan, Nacer Zazi, and Jean-Paul Chopart, Perpendicular Weak Permanent Magnetic Field Effect on the Electrodeposited Nanostructured ZnO Film and Its Kinetic Corrosion Behavior, Protection of Metals and Physical Chemistry of Surfaces, Vol. 55, No. 4, pp. 781–788 (2019).      https://link.springer.com/journal/11124/53/6/page/2.

3-   Mohammed-El-Amin Faid, Nacer Zazi, and Jean-Paul Chopart Corrosion Behavior of Shiny Side and Dull Side of Aluminum Foil in 0.3% Wt NaCl Non Agitated Solution: Appearance of Rhombus form Corrosion Morphology Protection of Metals and Physical Chemistry of Surfaces, , Vol. 55, No. 2, pp. 400–406 (2019). https://link.springer.com/journal/11124/53/6/page/2.

4- Zouaoui Salah, Djebouri Hassane and Mohammedi Kamal, Modelling and Simulation of Fluid Flow/Solid Particles with a New Contact Model (April 16, 2019). 2nd National Conference on Computational Fluid Dynamics & Technology 2018 (CFD & Tech 2018). Available at SSRN: https://ssrn.com/abstract=3371814 or http://dx.doi.org/10.2139/ssrn.3371814.

5- N. Zazi, H. Aouchiche, C. Benbaha, J.P. Chopart. Sulfuric Containing Sugar Bath and Permanent Weak Magnetic Field Effect during Anodizing AlCu 6 Si Alloy Sheet Surfaces, – Russian Journal of Non-Ferrous Metals, (2018), https://www.springer.com/materials/special+types/journal/11981,

6- Cherif Illoul, Nacer Zazi, Ferroudja Debiane, Jean Paul Chopart, Relation Between Mechanical Instabilities and Corrosion Sensitivity of Aluminum Body Cans Surfaces, Protection of Metals and Physical Chemistry of Surfaces 54 (5), 876-883 (2018), https://link.springer.com/journal/11124/53/6/page/2.

7- Salah Zouaoui, Hassane Djebouri, Kamal Mohammedi, Modelling and Simulation of Fluid Flow/Solid Particles with a New Contact Model, SSRN Electronic Journal · January 2018, https://www.ssrn.com/index.cfm/en/

8- Salah Zouaoui, Hassane Djebouri, Aomar Ait Aider, Kamal Mohammedi, Sofiane Kheladi, Motion of a Solid Particle in a Water Flow Inside a Pipe: Fundamentals, Chapter in Green Energy and Technology · August 2018 DOI: 10.1007/978-3-319-62572-0_15.

9- Salah Zouaoui, Hassane Djebouri, Kamal Mohammedi, Ali Bilek, Numerical study of multiphase flow and viscous fingering in a heterogeneous porous medium. Mathematical model, Conference: ACA  2018. https://math.unm.edu/~aca/ACA/2018/aca2018/participants.html.

10- Salah Zouaoui, Hassane Djebouri, Ali Bilek, Kamal Mohammedi, Fluid/Particles Flow Simulation by Finite Volume Method-Hybrid Approach, Conference: ACA 2018, https://math.unm.edu/~aca/ACA/2018/aca2018/participants.html.

11- Salah Zouaoui, Hassane Djebouri, Ali Bilek and Kamal Mohammedi. Modelling and Simulation of Solid Particle Sedimentation in an Incompressible Newtonian Fluid. Mathematics in Computer Science 11(2), April 2017. (ISSN 1661-8270). (DOI 10.1007/s11786-017-0315-3). https://link.springer.com/article/10.1007/s11786-017-0315-3.

12- Nacer Zazi and Jean-Paul Chopart. Dissolution of Ag/AgCl Reference Electrode and Deposition of Silver Onto the Surface of 5083 H321 Aluminum Alloy, During Corrosion in 3 wt % NaCl Solution at Rest Potential, Protection of Metals and Physical Chemistry of Surfaces, Vol. 53, No. 6, pp. 1114–1119, (2017). https://link.springer.com/journal/11124/53/6/page/2.

13- Nacer Zazi, Madjid Ifires, Sofiane Mehala, and Jean Paul Chopart. Corrosion Behavior on the Different Zones of AA2014 Welded Aluminum Alloy by AA5554 Filler Aluminum Alloy with TIG Process: before and after Solution Heat Treatments Followed by Ageing, Russian Journal of Non-Ferrous Metals, Vol. 58, No. 5, pp. 516–524 (2017).      https://www.springer.com/materials/special+types/journal/11981.

14- Rabeh Slimani, Nacer Zazi, and Jean-Paul Chopart, Investigation of Nickel Deposition Onto Section and Central Longitudinal Surfaces of AA1370 Aluminum Electrical wire with and Without a weak Permanent Magnetic Field, Protection of Metals and Physical Chemistry of Surfaces, Vol. 52, No. 1, pp. 111–118 (2016).

15- Nacer Zazi, Jean-Paul Chopart, Ali Bilek, Corrosion behavior and the weak-magnetic-field effect of aluminum packaging paper, Materials and technology 50 2, 165–173 (2016).

16- S. Zouaoui, H. Djebouri, K. Mohammedi, S. Khelladi, and A. Ait Aider. Experimental study on the effects of big particles physical characteristics on the hydraulic transport inside a horizontal pipe. Chinese Journal of Chemical Engineering (ISSN: 1004-9541), 24(2): 317–322, 2016. (doi:10.1016/j.cjche.2015.12.007).

17- Nacer Zazi, Jean-Paul Chopart, and Ahcéne  Bouabdallah, Thermomechanical Treatments Effect on Corrosion Behaviour of Aluminium_magnesium Alloy AA5083–H32, Protection of Metals and Physical Chemistry of Surfaces, , Vol. 51, No. 2, pp. 268–275 (2015).

18- Nacer Zazi, Jean-Paul Chopart, and Ahcéne  Bouabdallah, Thermomechanical Treatments Effect on Corrosion Behaviour of Aluminium_magnesium Alloy AA5083–H32, Protection of Metals and Physical Chemistry of Surfaces, Vol. 51, No. 2, pp. 268–275 (2015).

19- Marianna Marciszko, Andrzej Baczmański, Krzysztof Wierzbanowski, Jean-Paul Chopart, Alain Lodini, Nacer Zazi, Chedly Braham and Wilfrid Seiler, Stress measurements in polished Al–Mg alloy and CrN  coating using multireflection grazing incidence method, Materials Science Forum Vols. 783-786 pp 2091-2096 (2014).

20- Marianna Marciszko, Andrzej Baczmański, Krzysztof Wierzbanowski, Jean-Paul Chopart, Alain Lodini, Nacer Zazi, Chedly Braham and Wilfrid Seiler, Stress measurements in polished Al–Mg alloy and CrN  coating using multireflection grazing incidence method, Materials Science Forum Vols. 783-786 pp 2091-2096 (2014).

21- N. ZAZI “Effect of heat treatments on¶on the microstructure, hardness and corrosion behavior of nondendritic AlSi9Cu3 (Fe) cast alloy”, MATERIALS SCIENCE (MEDŽIAGOTYRA). Vol 19, N°3, pp 258-263 (2013).

22- M. Marciszko, A. Baczmańsk, K. Wierzbanowski, M. Wróbel, C. Braham, J.-P. Chopart, A. Lodini, J. Bonarski, L.Tarkowski and N. Zazi,  Application of multireflection grazing incidence method for stress measurements in polished Al-Mg alloy and CrN coating, Applied Surface Science 266 (2013) pp 256– 267.

23- Rabeh SLIMANI, Nacer ZAZI, Ali Bilek , J.P. Chopart,  Effect a weak magnetic field and imposed potential ¶on corrosion behavior of aluminum wire (AA1370),  Integrity, Reliability and Failure of Mechanical Systems, Funchal/Madeira, 23-27 June 2013,  Editors J.F. Silva Gomes (FEUP, U. Porto), Shaker A. Meguid (MADL, U. Toronto), Edições INEGI, 2013 (ISBN: 978-972-8826-28-4).

24- Nacer Zazi, J.P. Chopart, Ali Bilek, The difference between corrosion behaviors of perpendicular rolling surface and the rolling surface after homogenisation annealing of AA 5083-H321 alloy, Integrity, Reliability and Failure of Mechanical Systems, Funchal/Madeira, 23-27 June 2013,  Editors J.F. Silva Gomes (FEUP, U. Porto), Shaker A. Meguid (MADL, U. Toronto), Edições INEGI, 2013 (ISBN: 978-972-8826-28-4).

25- N. ZAZI “Effect of heat treatments on¶on the microstructure, hardness and corrosion behavior of nondendritic AlSi9Cu3 (Fe) cast alloy”, MATERIALS SCIENCE (MEDŽIAGOTYRA). Vol 19, N°3, pp 258-263(2013).

26- Boussafeur Kaci, Étude expérimentale de l’écoulement généré par un jet rond sur la surface d’un disque en rotation, Mechanics and Industry 13(2): 137-147, January 2011 DOI: 10.1051/meca/2011137.

27- Marianna MARCISZKO, Andrzej BACZMAŃSKI, Nacer ZAZI, Jean-Paul CHOPART, Alain LODINI and Krzysztof WIERZBANOWSKI, Stress in aluminium alloys measured using Göbel mirror as a primary beam optics of X-ray diffractometer, Materials Science Forum. Vol. 681 (2011) pp 393-398.

28- N.ZAZI, A. Bouabdallah, O. Aaboubi, J.P. Chopart. Pretreatment effects on the electrochemical responses for aluminium-magnesium alloy AA5083 corrosion behavior, J Solid State Electrochem Vol. 14:1705-1711 (2010).

Chapitres d’ouvrage:

• Salah Zouaoui, Aomar Ait Aider, Hassane Djebouri, Kamal Mohammedi, and Sofiane Khelladi. Motion of a solid particle in a water flow inside a pipe: Fundamentals. In Exergy for A Better Environment and Improved Sustainability 1, pages 217–231. Springer, 2018. (DOI: 10.1007/978-3-319-62572-0_15).